How to Replace Cosco 2000 Plus Self Inking Stamps Replacement Plates
Please follow these simple instructions to change your printing plate
1. With the words 2000 Plus facing you, hold down the lock buttons on both sides of the stamp and press top of stamp down. This will lock your stamp in a down position. To avoid inky fingers, you may wish to wipe off excess ink from the old printing die plate.
2. Hold the stamp in your hand with the words 2000 Plus facing you. Turn the stamp upside down so the words 2000 Plus are now upside down and facing away from you. Carefully and slowly peel off the old printing die. Hold the new printing die plate so the words are readable. Flip the printing plate over (bottom line on top) centering the die plate and apply to the stamp pressing down firmly onto the adhesive. You may need to add a new piece of double sided tape if the old adhesive tape is not usable anymore.
3. Press stamp down to unlock.
4. Your stamp is now ready for use. After testing a few times, you can stamp the ID card, or a new small sheet of paper, and place it under the top window for stamp recognition.
No comments:
Post a Comment
Spam will be removed. Do not post any external links either.